SP-112 Lowest Cost PIR Sensor

Our lowest cost PIR sensor with
HighBar™ waveform processing!

The NEW SP-112 with PYROFLEX™**

   Look at these Features:

  • PYROFLEX™ infrared detector and advanced HighBar™ intruder detection work together to provide consistent detection sensitivity throughout the monitored area, over the full range of intruder motion speeds.
  • Sensitive tamper detection switch
  • Precise factory calibration for dependable performance of every sensor
  • World-class immunity to RF interference
  • Look-down detection directly below the sensor to catch wall-creeping intruders
  • Tightly-mated bug guard to protect the sensor optics from insects, spiders and dust
  • Selectable processing sensitivity for different environmental requirements

High False Alarm Immunity

HighBar™ waveform processing rejects noise!  After signal filtering, real pulses are separated
from noise by length of time.  In the next stage, alternating polarity (+/-) pulses are required to qualify for an alarm -- better than many simple
ASIC-based sensors.

PYROFLEX™** IR Detector ?The False Signal Smasher

  • 10x ?100x more signal than conventional detectors
  • Less amplification needed in sensor
  • 10x ?100x less amplification for false alarm signals
  • High immunity to RF, shock, temperature changes, white light, electrical surges

Three-Stage White Light Protection

  • White diffusing lens
  • Clear bug guard ?avoids light concentration
  • Large 4 x 5 mm white light filter window on detector, so elements can be far from filter

Reliable Intruder Detection

HighBar™ waveform processing delivers repeatable detection performance than many   other sensors?simple ASIC processing. Detection requires consistent signal size -- the signal must cross both thresholds with alternating polarity (+/-) pulses.

HighBar™ processing detects intruders!

Easy Installation

  • 45-degree terminal block for easy wiring
  • 10-minute zone finder mode
  • Deep wire channels and dual cable entry
  • 45-degree corner-mounting surfaces
  • Knock-out holes for mounting and wiring
    Swivel-mount accessory interface

Temperature Range

  • Operation from -10C to +55C

 

               Optical View Pattern (Top)

Specifications
Range
 12m in sensor-facing direction (max)
 17m at 45o angle from sensor-facing
     direction (max)
Power Supply
  Voltage
  Current
  8 - 14 Vdc
  18 mA at 12 Vdc
Alarm Relay
  Reed type, 50mA, 30 Vdc
Tamper Switch
  Form A (NC) 50 mA @ 30 Vdc
RF Immunity
  30 V/m 10-1000 MHz;  10 V/m 1-2 GHz
Sensitivity
  2-event/2.5 C  or 3-event/3.0 C

EN 50131

 Grade 2
Temperature
  -10o C to +55o C
Housing
  High-Impact ABS
Dimensions
  94 x 50 x 42 mm ( H x W x D )
Optical
fields of view
Long Range
Mid Range
Short Range
Look-down
44
12
6
4

Optical View Pattern (Side)

Download the SP-112 Product Brochure HERE!
[主页] [关于我们] [法律声明] [创始人] [产品展示] [SP-112] [SP-215] [SP-315] [SX-815] [DF-1015] [M-2015] [CP-108] [支援网页] [新闻] [联系我们 ]

**U.S. Patent no. 7,042,134    Patents pending worldwide.

版权所有©2004-2009，西荣科技有限公司。DFIR™ 、PYROFLEX™ 和SureSpot™ 属西荣科技已注册商标。