DF-1015 DFIR™ Motion Sensor

Introducing DFIR™**
Technology!

The NEW DF-1015 with DFIR™**

   Look at these Features:

  • Precise factory calibration for dependable performance of every sensor
  • Multiple white light immunity features:
    • Clear bug guard – avoids light concentration
    • White diffusing lens
    • Large IR detector window (4.2 mm x 5.2 mm)
  • Look-down detection directly below the sensor to catch wall-creeping intruders
  • Tightly-mated bug guard to protect the sensor optics from insects, spiders and dust
  • Selectable processing sensitivity for different environmental requirements
     
  • Daily automatic PIR supervision
    Self-test by TrueGlow™ IR source
  • Continuous supervision of:
    • Power supply voltage
    • Ambient temperature
    • IR detector operational parameters
  • Failure indication :
    • Blinking LED
    • Non-closing of alarm relay after any alarm signal event (Note: the sensor will NOT initiate an alarm to signal a failure.)
    • Sensitive tamper detection switch
  • Remote LED Enable control input

Superior False Alarm Immunity

Split-View™** DFIR™** opto-electronic system

  • Dual Frequency InfraRed™ system
     New quad-element infrared detector**
    • Intruders produce dual-frequency signals
    • Interference produce only one frequency
  • Protection against false alarms arising from:
    • nonmoving objects of changing temperature
    • shock
    • extreme radio interference
    • bright white light
    • electrical surges
    • air currents
  • Continuous All-Function Supervision with Failure Indication

COMPARE DFIR™ vs. TRADITIONAL PIR

ACTUAL
INTRUDER

INTERFERENCE

Strong Intruder Detection

SureSpot™ microcontroller waveform processing is on the watch!  Where the complex curves and dips of real signals “fool” other sensors’ ASICs and simple processing, SureSpot™ processing detects intruders!

The added signal strength provided by PYROFLEX™ detector allows superb summertime detection in near-human temperature environments.

Supervision Features

  • Daily automatic PIR Self-test by TrueGlow™ IR source
  • Continuous checking on:
    • power supply voltage range
    • ambient temperature range
  • Continuous monitoring of IR detector operational parameters
  • Failure indication :
    • Blinking LED
    • Non-closing of alarm relay after any alarm signal event           (Note: sensor will NOT initiate an alarm upon failure.)
  • Remote LED Enable control input

Easy Installation

  • 45-degree terminal block for easy wiring
  • 10-minute zone finder mode
  • Deep wire channels and dual cable entry
  • 45-degree corner-mounting surfaces
  • Knock-out holes for mounting and wiring
    Swivel-mount accessory interface

Wide Temperature Range

  • Operation from -40C to +55C

 

               Optical View Pattern (Top)

Specifications
Range
 15m in sensor-facing direction (max)
 21m at 45o angle from sensor-facing
     direction (max)
Power Supply
  Voltage
  Current
  8 - 14 Vdc
  14 mA at 12 Vdc
Alarm Relay
  Solid state, 1500 Vrms isolation
Tamper Switch
  Form A (NC) 50 mA @ 30 Vdc
RF Immunity
  20 V/m 10-1000 MHz;  10 V/m 1-2 GHz
Sensitivity
  2-event/2.5 C  or 3-event/3.0 C

EN 50131

 Grade 2
Temperature
  -40o C to +55o C
Housing
  High-Impact ABS
Dimensions
  112 x 50 x 42 mm ( H x W x D )
Optical
fields of view
Long Range
Mid Range
Short Range
Look-down
88
30
18
8

Optical View Pattern (Side)

Download the DF-1015 Product Brochure HERE!

**U.K. Patent no. GB2414551    Patents pending worldwide.
[Home] [About Us] [Products] [SP-112] [SP-215] [SP-315] [SX-815] [DF-1015] [M-2015] [CP-108] [Support] [News] [Contact Us]

Copyright 2004-8, SUREN Systems, Ltd.  SUREN, DFIR, PYROFLEX and SureSpot are Trademarks of SUREN Systems, Ltd.